F-500 Mud Pump
F-500

Structural Features of F- 500 Mud Pump

  • Wheel set of transmission gear is in an integrated herringbone gear transmission,higher drive torque and better operation.
  • Frame: steel plate welded structure, good rigidity and higher strength.
  • Crankshaft: cast alloy steel.
  • Pinion: forged by alloy steel.
  • Crosshead: cast ductile iron with good antifriction performance.
  • Hydraulic cylinder: forged by alloy steel.
  • Valve assembly: API 6# valve.
  • Lubrication system: forced lubrication and splash lubrication.

Specifications F - 500 Mud Pump

1. Model

Horizontal triplex single acting piston pump

2. Input Power Rating

(500 hp) 368 KW

3. Speed Rating

165 SPM

4. Stroke

191 mm (7.5”)

5. Max. Bore

170 mm (6 3/4”)

6. Gear Ratio

4.286:1

7. Pinion shaft Size

Ø139.7 (5 1/2”)

8. Suction Inlet

8” Flange

9. Discharge Outlet

4” Flange  5000# API

10. Total Length

3035 mm

11. Total Width (incl. discharge screen assembly)

3167 mm

12. Total Height (excl. discharge dampener)

1248 mm

13. Total Weight (excl. completed tool kit)

9770 kg

14. Liner size, Displacement and Pressure:

Bore (in)

6 3/4

6 1/2

6 1/4

6

5 1/2

5

4 1/2

4

Displacement (g/m)

582

516

453

395

340

290

243

201

Pressure (Psi)

1328

1500

1700

1957

2271

2657

3171

3828

Notes:

  1. Based on 90% mechanical efficiency, 100% coefficient of fullness and 100% volumentric efficiency.
  2. Pressure corresponding to liner size (bore, British system) is calculated on rated input power 1000 hp (British system).
  3. British horsepower = 1.014 metric horsepower

Specifications of liner and piston shall be determined by buyer.

The following options shall be made by Buyer

  1. Connecting pipe
  2. Spraying pump assembly
  3. Right-angle elbow
  4. Crossover sub
  5. Pressure gauge
  6. Relief valve

MZ-9 Drilling Mud Pump
MZ-9

Model MZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. All the specifications of MZ-9 are equivalent to those of Gardner Denver PZ-9. We have more than 100 sets of this pump operating in U.S.A. and it is well received there.

Technical Specifications

No.

Descriptions

Parameters

1

Type

Horizontal triplex single acting piston pump

2

Rated input power

1000 HP

3

Rated strokes

130 SPM

4

Stroke length

9″ (228.6mm)

5

Rated input speed

582 rpm

6

Gear ratio

4.48: 1

7

Valve standard

API 7＃

8

Suction inlet

10″

9

Discharge outlet

5 1/8″(5000PSI)

10

Overall dimension

205×94×100.5in (5200×2388×2550) mm

11

Pump weight

44050 lb (20000 kg)


MZ – 9 Pump VS Other F – 1000 Pump

Model

Other F -1000 Triplex Single Acting Piston pump

MZ-9 Triplex Single Acting Piston pump

Max. Input

746 kw  (1000hp)

746 kw  (1000hp)

Stroke Length

254 mm  (10″)

229mm (9″)

Max. speed

140 (SPM)

130(SPM)

 Gear Ratio

4.2 :1

4.48 :1

Suction Inlet

305mm (12″) Flange

10″

Discharge Outlet

5 1/8″ Flange（35Mpa）

5 1/8″ Flange (35Mpa）

Weight

16642 Kg

16200Kg


Liner Diameter

Displacement

Max Pressure

MZ-9

F-1000

MZ-9

F-1000

MZ-9

F-1000

Inch

mm

mm

Gal/rev

L/rev

Gal/min

L/S

L/S

PSI

MPa

MPa

7

178

170

4.50

17.03

585

36.9

43.2

2,639

18.2

16.4

6.5

165

160

3.88

14.69

504

31.8

38.3

3,060

21.1

18.5

6.25

159

150

3.59

13.59

466

29.4

33.6

3,310

22.8

21.1

6

152

140

3.30

12.49

430

27.1

29.3

3,592

24.8

24.2

5.5

140

130

2.78

10.52

361

22.8

25.2

4,274

29.5

28.0

5

127

120

2.29

8.67

298

18.8

21.5

5,000

34.5

32.9

4.5

114

110

1.86

7.04

242

15.3

18.1

5,000

34.5

34.3

4

102

 

1.47

5.56

191

12.1

 

5,000

34.5

 

F-1000 Drilling Mud Pump
F-1000

F-1000 drilling pump is a kind of horizontal triplex single-acting piston pump, made up of power end and fluid end, designed with advanced structure, small size, reliable operation mechanism, interchangeable components, and easy maintenance. The expendables, bearings, sealing parts and technical parameters of this pump are the same as EMSCO F-1000 pump.
The power end includes framework, pinion shaft assembly, crank shaft assembly, crosshead assembly and pony rod, etc. The fluid end includes module, valve assembly, liner, piston assembly, suction manifold, etc. In order to avoid gas lock and reduce the pressure pulsation at the discharge outlet, a suction pulsation dampener and a discharge pulsation dampener are installed respectively at the suction pipe and the pump outlet. And a shear-pin safety valve is installed at the other end of the pump outlet to ensure the pump pressure not to exceed the rated working pressure.
Splash lubrication and forced lubrication are combined for the gears, bearings and crosshead at the power end to ensure sufficient lubrication, while the water supplied by spray pump is used to lubricate, clean and cool the liner and piston at the fluid end.
A special set of handling (assembly and disassembly) tools are provided for routine maintenance of the drilling pump.
When F-1000 drilling pump remains in good condition it will be an excellent partner of every drilling worker and bring you great benefits.

Technical Specifications


No.

Description

Parameters

1

Type

Horizontal, triplex single-acting piston pump

2

Rated input power (HP)

735KW(1000HP)

3

Rated strokes

140

4

Stroke length

254 mm (10in.)

5

Gear type

Herringbone tooth

6

Gear ratio

4.207:1(122:29)

7

Suction connection size

12” flange

8

Discharge connection size

5-1/8”flange 5000#API

9

Pinion shaft diameter
and extension

196.85/7-3/4 ×336.55/13-1/4”

10

Key connection size

50.8×50.8 (mm)/ 2”×2” (in.)

11

Module

API 6#142.875/5-5/8”

12

Dimensions

4269×3167×1818 mm

168”×124-5/8”×71-1/16”

13

Base width

1790 mm/ 70 1/2”

14

Pump weight

18790 kg /41420lb

F-1300/1600 Drilling Mud Pump
F-1300

F-1300/1600 drilling pump is a kind of horizontal triplex single-acting piston pump, and consists of two main parts: power end and fluid end. It is characterized by advanced structure, small volume, high reliability, better interchangeability and easy maintenance. The expendables accessories, bearings, sealing parts and technical parameters of this pump are the same as EMSCO F type pumps.

Technical Specifications


Description

Parameters of F1300 Drilling Pump

Parameters of F1600 Drilling Pump

Form

Horizontal Triplex Single-acting Piston Pump

Rated Input Power kw (hp)

960 (1300)

1180 (1600)

Rated Strokes

120 SPM

Stroke Length x Max.
Cylinder Liner Diameter

305 x 180 mm (12” x 7.0867”)

Gear Type

Herringbone Tooth

Gear Ratio

4.206:1

Lubrication

Positive and Spray Lubrication

Suction Connection Size

12” Flange (~ 305mm)

Discharge Connection Size

5-1/8”flange 5000#API (1300 mm Flange 35 Mpa)

Pinion Shaft Diameter
and Extension Length

215.9 ×337 mm (8 1/2” 13 1/4”)

Key Connection Size

50.8 × 50.8 mm ( 2”×2” )

Module

API 7#

Dimensions

4615 × 3260 × 2004 mm

181 11/16” ×128 3/8” × 78 7/8”

Base W x L

1880 x 4426 mm (74” X 174 1/4”)

Pump Weight

25850 kg /56959lb

26100 kg /57540 lb

 

F-2200 MUD PUMP
F-2200

Features of F – 2200 Mud Pump
The most powerful mud pump in the industry
Comply with API Spec Q1 and API Spec. 7 K standards
Frame: welded low alloy structural steel
Main shaft: high-strength steel (Gr.50)
Forged and welded crankshaft (ASTM 4130)
One piece forged pinion shaft (ASTM 4340)
Babbit metal on surface of crosshead to improve wear-resistant properties
Fluid end lubrication: External forced lubrication and internal forced splash lubrication to ensure full lubrication.
One-piece forged structure of pulsation dampener
One piece forged discharge strainer block

SLF- 2200 MUD PUMP SPECIFICATIONS


Type

Horizontal triplex single action mud pump

Model

SLF-2200 drilling pump

Rated input power

1650 kw

1650 kw

Rated strokes

105SPM

Stroke length

356 mm

356 mm

Gear ratio

3.512∶1

Module

API 8#

Max Liner Size

230 mm

230 mm

Max. Working Pressure

52 MPa

52 MPa

Max. Pressure

70 MPa

70 MPa

Suction Inlet

305 mm

305 mm

Discharge Outlet

5 1/8″flange  70MPa

5 1/8″flange  70MPa

Pinion shaft diameter

254 mm

254 mm

Keys

63.5×44.45 mm

63.5×44.45 mm

Dimensions

5740×3021×3160mm

5740×3021×3160 mm

Weight

43079 kg

94973 Ib

SLF-2200 Displacement vs. Pressure

Liner Size (in)

9”

8 1/2”

8 1/4”

7 3/4”

7 1/2”

7”

6 3/4”

6 1/4″

6”

5 1/2”

5”

4 3/4”

Rated Pressure

MPa

19.0

20.8

22.8

25.2

27.9

31.0

34.8

39.3

44.7

51.3

51.7

70

Psi

2760

3015

3310

3650

4040

4505

5050

5700

6485

7445

7500

10000

Displacement

L/s

72.98

65.09

61.32

54.11

50.68

44.15

41.05

35.19

32.43

27.25

22.52

20.32

GPM

1156

1031

972

857

803

700

652

558

505

432

356

322

Assuming the mechanical efficiency h=90%，fill factor a=100%，volumetric efficiency =100%